TILE INSTALLATION TOOLS

Tile Installation Tools

Compare tile leveling clips, wedges and kits

Choose the clip from the actual tile thickness and planned joint. Then check the corresponding wedge, pliers and refill quantities.

Measure the tile and joint separately

Look for a thickness range and a separate joint-width number. Manufacturers offer different clips within a system. Record both measurements before comparing two listings with the same brand or package color.

Match the system components

Treat the clip, wedge and pliers as a matched set unless the maker documents another combination. A refill may supply only clips. Compare starter-kit quantities with the parts you already have and the maker’s instructions for your layout.

Compare reusable parts and consumables

Check which pieces the maker allows you to reuse and which are consumed. Package count alone gives little buying guidance if one offer contains a mix of pieces and the other contains just one component.

Source documentation

Guide questions

Which number is the tile thickness?

Look for a supported thickness range for the clip, separate from the stated spacing or joint width.

Can I use different brands together?

Check for documented compatibility. The wedge and clip must engage in the way the maker specifies.

What should I look for in a refill?

Verify the exact system, size, part number and package quantity before comparing refills.

Which tool suits the job?

  1. The Raimondi RLS HD starter includes clips, wedges and floor pliers. The 1,000-pack is a wedge refill. Keep the refill for an existing compatible setup, or choose the starter if you need the pliers and clips too.

  2. Compare two different joint and hardware systems. Raimondi's starter provides 1/16 inch clips and wedges. The RUBI CYCLONE bases create a nominal 1/32 inch joint and fit matching CYCLONE caps. Check which system you already have before ordering refill bases.

Tools in this guide

Shop these departments